2. Windows Setup

Minimal installation to prevent software bloat. Downloads avaialable at the Support Site.

Ensure printer is configured first. See Printer Configuration.

2.1. Manual Install

Recommended. This will install the printer/scanner via the print management console using only drivers and basic scanning software. Also applies to adding printer across subnets. Requires SNMP and WebServices to be enabled.

2.1.1. iPrint&Scan

Enables all scanning options when using the scanning feature.

Download and extract Brother iPrint&Scan from the Support Site. Install.

2.2. Full Install

Not Recommended. Installs all additional software and requires SNMP with the device on the local subnet to install correctly. WebServices must be enabled.

2.3. ControlCenter4

Advanced post-scanning options. Generally this can be done by other applications. Not recommended.

2.4. Validate Install

  • ⌘ › settings › printers › Brother MFC-L2750DW › manage. Both printer and scanner will be listed in the dropdown.

  • manage › printer (dropdown) › printer properties should open a window with a blue ‘Brother’ bar.

  • ⌘ › iprint & scan › scan › 1200dpi properly installed scanner will allow > 300dpi scanning, and show all settings.

2.5. Complete Uninstall

Use the following to clean a system if brother utilities were installed and need to be removed.